Rotary Response and Racing
Factory original, flow developed and proven aftermarket
|
FD3S parts |
|
Parts pages: The web pages:
|
Just added-
|
Ebay store inventory item: |
|
| NEW 1993 Mazda RX7 Factory Dealership Workshop Manual FSM NEW | |
|
click image to enlarge - Full size Dealership Workshop Manual Includes binder with label All mechanical and troubleshooting, wiring diagram and collision manual No need to download then time to prep for print and cost of paper and ink New |
|
| This is a genuine original Mazda RX7 Factory Workshop Manual | |
'S' prefix on a part number indicate a salvage part. 'BL' or ' BB' indicate Blue Label or Blue Box - Mazda Factory Part.
MSRP=Mazda Suggested Retail Price
*BL/BB- Blue Label/Blue Box
Miscellaneous Factory Mazda New parts |
|||
| Salvage below seen below | |||
| Price each | |||
| 0000-81-A902 antenna mast |
|
64.48 | |
| N3A1-10-502 93- Rotary FD3S |
|
||
|
FD01-28-8C0A
Bushing |
|
69.73 | |
|
FD01-34-213
Seal |
|
16.46 | |
|
N326-11-D15
thermal pellet |
|
62.67 | |
|
N3A1-18-741 NEW
Solenoid valve |
78.14 | ||
| F285-18-741 Solenoid valve - vent NEW | ![]() |
81.00 | |
|
N3A1-20-285
duty valve one new |
|
170.32 | |
|
N3C2-20-339
tank, air |
|
116.46 | |
|
R506-17-640
switch |
|
45.42 | |
|
0000-18-130A
ZE30 |
|
47.73 | |
|
N3Z1-18-701
control unit |
|
174.00 | |
| Mazda Misc new parts |
|
||
|
FD01-50-180A
NLA from Mazda trim, right nose |
bumper, filler |
34.75 | |
|
FD01-51-5T0
cover, right grille, filler |
|
54.95 | |
|
FD01-51-5U0
cover, left NLA from Mazda grille, filler |
|
LAST
ONE
62.20 |
|
|
FD01-51-SE1A
trim, right behind front lights |
headlight, protector |
49.95 | |
|
FD01-51-SE2A
NLA from Mazda trim, left behind front lights |
headlight, protector |
LAST
ONE
54.65 |
|
| Antenna Mast 93/95 0000-81-A902 |
|
59.98 | |
| Price each | |||
| Salvaged lightly used | |||
|
Part number
'S' prefix indicates salvage part |
MSRP New price | Salvage sale price | |
|
SN3A1-20-285
Three used
|
All tested, one repaired, metal tubing used
|
80.00 | |
one used SN3A1-18-741 |
Salvage unit has not been repaired | 48.00 | |
|
SN3A1-18-221 Sensor
One sensor only
|
Retail new
186.36
|
Sale price $75 | |
|
SN3A1-18-211
Boost Sensor 2 available |
Retail new 489.40
|
Sale price $249 | |
|
SN3A1-20-660
Idle air control valve |
Retail new 449.05
|
Sale price $220 | |
|
SN3A3-13-990 AVC +
SN3A1-18-741 JSPEC No EGR or Air Bleed |
Retail new 690.77
78.14
|
Sale price $125
|
125 |
|
SN3A3-20-300 EGR CA
tested works |
Retail new 312.72
|
Sale price $120
|
120 |
| Secondary Fuel injector rail only |
|
75 | |
| S |
|
85 | |
| S |
|
35 | 35 |
| Fuel injectors |
|
85 EACH | 85 each |
![]()
![]()
Below are parts that will be available, items being added daily
Purchase Parts online, using secure PayPal shopping cart ![]()
If you see any item you are interested in please email: sales@rotaryresponse.com with any parts requests, include mazda part number.
|
** Ported Mazda FD3S Intake manifold ** Flow bench developed and tested porting 4% - 5% increase bolt on |
|
Upper
intake manifold - flow designed porting
|
|
Lower
intake manifold - flow designed porting
|
|
| don't forget to click on images to enlarge | |
| $399.95 plus shipping | |
Service Group |
Part Number |
Description |
Price Each |
|
| B6Y2-14-302 | Oil filter RX7/MX5 | $8.95 | $8.95 | |
| N3A1-20-490 | Fuel filter 93/96 | |||
| N3A1-13-Z40 | Air filter 93/96 | |||
| NGK BUR9EQ-P | Spark plug 93/96 lead | $18.85 each | ||
| NGK BUR7EQ-P | Spark plug 93/96 trail | $18.85 each | ||
| NGK RC-Z30
Mazda 0000-24-130A
|
Wire set - FD3S |
|
||
![]() |
||||
| Intake | N3A1-13-112 | Gasket, Dynamic chamber | $24.00 | |
| Intake | N3A1-13-111C | Gasket, intake/motor | $39.15 | |
| Intake | N3A1-13-655 | Gasket, Throttle body |
|
|
| Intake | N3C1-13-245 | Hose, intercooler out | sfdg | |
| Intake | N3A1-13-221A | Hose, air box-#1turbo | $123.80 | |
| Intake | N3A2-13-247 | Hose, connector/pipe | ||
| N3A1-13-232 | Connector
turbo inlet/hose![]() |
129.55 | ||
| Cooling | N3A1-13-681A | Hose, dynamic chamber/motor | ||
| Cooling | N3A1-13-691A | Hose, dynamic chamber/motor | ||
| Cooling | N3A1-13-692A | Hose, dynamic chamber/motor | ||
| Cooling | N3A1-15-186B | Hose, upper radiator | ||
| Cooling | N3A1-15-185B | Hose, lower radiator | ||
| Cooling | N3A1-15-183A | Hose, thermo/air separate tank | ||
| Cooling | 8AF4-15-100A NLA new from MAZDA - Rebuilt only from Mazda - recommend AutopartsWarehouse.com NPW New from Japan | Water pump | ||
| Cooling | 8AF6-15-171 | Thermostat | ||
| Cooling | KF01-15-205 | Cap, motor | ||
| Cooling | N3A1-15-205A | Cap, air separate tank | ||
| Cooling | N3A1-15-35XB | Air separation tank AST | $126.70 | |
| Cooling | N3A1-15-184A | Hose, air separate tank/rad | ||
![]() |
||||
| Belts | N3A1-15-907 | Power steering | ||
| Belts | N3A1-15-908-9U | Power steering w/AC | ||
| Belts | N3Z1-18-381 | Water pump, air pump, alternator | ||
| Exhaust | N3A1-13-712 | Gasket, turbo inlet | ||
| Exhaust | N3A1-13-162 | O'ring, turbo inlet | ||
| Exhaust | N3A1-13-461 | Gasket, motor/manifold | ||
| Exhaust | N3A1-13-710 | Gasket, exhaust manifold/turbo | ||
| Exhaust | N3A2-13-710 | Gasket, exhaust manifold/turbo | ||
| Exhaust | N3B7-13-491A upgraded HD | Gasket, turbo/catalyst | ||
| Exhaust | RF36-40-305 | Gasket, catalyst/silencer | ||
| Oil/turbo | N3A1-14-293 | Gasket, oil line | ||
| Oil/turbo | N3A2-14-293 | Gasket, oil line | ||
| Water | N3A1-13-536 | Hose, water- turbocharger | ||
| Water | N3A1-13-54X | Hose, water- turbocharger | ||
| Factory Mazda New | |||
| FD01-32-125A Boot, steering rack L | ![]() |
$48.05 | |
| FD02-32-125A Boot, steering rack R | $48.05 | ||
| B455-32-279 BOOT | TIE ROD BOOT FD3S | 9.95 | |
| Salvage - Rebuilt/Reconditioned | |||
| Transmission JDM 31K miles | FD3S Transmission JDM 31K miles | $650 | |
| Transmission rebuilt | FD3S US Spec 68K miles rebuilt | $1250 | |
| Power Steering Pump | $85 | ||
AC compressor 3 available |
![]() |
$115 | |
| Alternator | ![]() |
$75 | |
| Secondary Fuel Rail only | ![]() |
$75 | |
Oil pans used 3 available |
$35 each | ||
Stock IC's 4 available |
$50 each | ||
| B455-32-279 BOOT | TIE ROD BOOT FD3S | 9.95 | |
| N3A1-13-461
used
New available for $94.95 each |
![]() |
39.95 pair | |
| Stock
twin turbos
100K Main reason for replacement - housing damage Carts can be rebuilt kits available $175 per cart |
![]()
|
inquire Will sell cartridges only $185.00 |
|
| Stock
twin turbos
76K~ Reason-crack in housing didn't want to put any more money into this setup went 99 -Carts have been rebuilt
|
|
275.00 | |
|
4 Original factory mazda radiators, pressure and flow tested good by Performance Radiator Tucson |
2- standard, tested only | $100 each | |
| 1- automatic, cleaned and flushed | $210 | ||
| 1- standard, cleaned and flushed | $200 | ||
| Rebuilt/resealed turbo unit for FD3S stock twin turbo Primary only |
![]() |
$315 Includes core charge |
|
| Resurfaced exhaust manifold | ![]() ![]() |
$100 | |
***Prices subject to change without notice***
| Factory Mazda New | |||
NIB - 13B FD3S Rotor US Spec N3YA-11-B10 TWO AVAILABLE |
Mazda Suggested Retail Price -
$998.44 each
sale price $810 each $1500 pair |
|
|
|
NIB - 13B FD3S Eccentric Shaft US Spec N3G1-11-D00 ONE AVAILABLE |
MSRP $629.79 sale price $555 | ||
|
|||
|
Mazda Factory new FD3S Gear Rear N3YA-10-E10B |
|
MSRP $606.95 sale price $545 | |
Salvage Engine parts Used |
|||
| 1993 FD3S Steel housings | 6 available | 125 each | |
| Rotors | |||
|
13B FD3S Rotor US Spec N3YA-11-B10 |
$200 | SOLD | |
|
Pair of rotors. Cleaned ready for install. New Oil Control ring orings. Corner seals no notching, Side Seals < 10% wear. Clearances all good. These were going in a spare motor. Have a set of reasonable apex seals, Recommend new. |
Both are "C" rotors |
|
$800.00 for the matched set |
| Rotor housings | |||
|
|
|||
| NO WARRANTIES EXPRESSED OR IMPLIED - USED - SOLD AS IS - NO RETURNS - | |||
| N3Y2-10-S80 Rear Housings | |||
| NO WARRANTIES EXPRESSED OR IMPLIED - USED - SOLD AS IS - NO RETURNS - SEE WEBSITE FOR NEW PRODUCT ORDER | |||
|
65K 407 condition good |
$315.00 | ||
|
N3Y2-10-S80 FD3S Rear FLOW BENCH DESIGNED PORT |
|||
|
OPTIMUM STREET LEGAL PORTING for fuel consumption and emissions. 6 to 8 point increase in fuel mileage when combined with flow ported intake housings and manifold 12% increase HP $105 per hole bench charge for these holes |
68K 250 condition good NO WARRANTIES EXPRESSED OR IMPLIED - USED - SOLD AS IS - NO RETURNS - |
$435 | |
Please make any other requests via e-mail... Thank you.
![]()
Service Group |
Part Number |
Description |
Qty Req | Price Each |
Total |
| Upgrade | VH Si60 125X90 | Duro Blue silicone tubing* | 25 ft | $3.15 | $78.75+SH |
| Thick wall non-kink, non-collapse no blow off | Quality assurance 4.0 AQL as contained in MIL Std 105-D
-
|
|
35 ft | $2.95 | $103.25 +SH |
|
|
|
|
|||
| Racing Beat Type 1 rear
spoiler
Garage kept car, rarely saw the sun. Color - RU. All hardware and gaskets. condition 10 |
click on images enlarge |
$350 Please email if interested >>> RBT1 |
|||
|
|
*- *- Inquire about bulk prices on Duro Blue > 100ft
** Not legal for street use in IM240 compliance areas.
Mazda prices have increased on the average over 10% January 1st.
Items now shown that can be bought through paypal will be limited to stock on hand.
Other listed items or any available Mazda part may be ordered through email or phone
send requests to: sales@rotaryresponse.com most of the time
or call: 520 327 6404 - Message any time
Human present - Tues - Fri 8:30 to 5:00 Arizona Time (no technical on this phone)
Visa MasterCard Discover orders accepted
Standard shipping charges to be applied,
US Post Rates UPS Rates FedEx Rates
Rx for your 7
Tucson, Arizona 85716
![]()
01 December 2010 13:23 -0500